Concrete and wood texture bathroom wall mural
Reference: F6843Concrete and wood texture bathroom wall mural - Concrete and wood texture refers to the physical appearance of a surface that is made up of both concrete and wood materials. The combination of these two materials can create a unique and interesting visual effect, perfect for bathroom murals. This product is manufactured in matt colours and made of non-woven wallpaper. It should be applied using glue on the wall or on the product and the tools to apply it are a roller, a brush, a brush and a cutter. It can be cleaned with a damp cloth and a little neutral soap. It has a grammage of 180 grams per square meter, a durability of 10-15 years and can be easily removed by wetting the product with a sprayer. It is produced and shipped in rolls 50 centimeters wide and has an M2 reaction to fire certification.
Why Use This Product for Decoration?
Concrete and wood textured bathroom wallpaper mural is perfect for adding a touch of modern elegance to any room in your home. Its unique design will be sure to make an impact, particularly given the fact that it is waterproof and suitable for both indoors and outdoors. It is also extremely durable and resistant to wear and tear, making it perfect for high traffic areas such as hallways and entrances. The range of colours allows for a variety of looks, perfect for achieving a variety of décor styles.
How to Apply This Product
It is incredibly easy to apply. All you need is enough wallpaper paste and a flat surface. Make sure to spread the paste evenly and allow it to dry before hanging the mural. Once finished, simply gently remove any excess paste and allow the mural to dry. For extra protection and a longer lasting effect, you can use a sealer to protect the mural from moisture, dirt and dust.
Why Buy This Product in Our Online Shop?
Our online shop provides the highest quality products with a wide selection of concrete and wood textured designs, plus a range of other styles. Enjoy fast delivery, hassle-free returns and excellent customer service from our team. So why not bring your walls to life today with our stunning collection of wall murals?
Strip width: 50 cm
Thickness / weight: 180 g/m2
Custom-made: select the measurements you want and we will adapt the design
100% customizable product: if you want to modify any element of the design, do not hesitate to contact us
Matte finish (satin): non-glossy finish with bright and elegant colors
Easily washable product: Can be gently cleaned with a damp cloth or a non-abrasive sponge and water
Easy installation (bubble-free): Stick directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
100% recyclable product: made with eco-friendly inks
100% secure payments
Also, it will be wrapped in bubble wrap inside a sturdy cardboard package that protects the product during shipping.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.